PLC Optical Splitter Automatic Coupling System
Cost-effective automatic alignment and packaging system for PLC optical splitters.; Matches the technical specifications of comparable imported systems at a much lower price.; Developed in-house, so it can be customized to specific customer requirements.; Operators fix the FA/chip on the fixture and load/unload by switching materials.; Software automatically runs to the FA/chip parallel-adjustment position, with CCD or red-light assistance.; Compact, precise, easy to operate and highly cost-effective.
The optical device PLC optical splitter automatic coupling system has developed a cost-effective PLC optical splitter automatic alignment and packaging system for customers. This system breaks the high price of similar foreign systems and also reaches the technical indicators of similar foreign systems. Since our system is independently developed, we can customize the system according to customer requirements and special needs, which greatly facilitates customers.
plc optical splitter automatic coupling system
PLC automatic coupling system project introduction:
This system uses personnel to fix FA/chips on the fixture, and loads and unloads materials through the process of switching materials.
After the material fixture is installed, click the "Start" button of the software, and the system will automatically run to the position where the FA and the chip need to be adjusted parallel. Rely on CCD or red light to manually adjust the parallel, find the initial light, couple the output light, and automatically control the glue layer. Manual dispensing and automatic UV. After the system, you can also test relevant parameters to determine Pass/Fail, and the system will automatically prompt to install the next material.
This equipment has low personnel requirements. You only need to install the materials on the fixture as required and assist in adjusting the parallelism.
Each coupling data can record the time, power, and coupling period in detail.
Main features of plc optical splitter automatic coupling system
Highly stable sub-micron adjustment accuracy
Precise gap control via sensors
Various optical device fixtures
Efficient UV light source fixture
Powerful, flexible and easy-to-use operating software
Alignment coupling time is about 120 seconds
Modular design, easy to expand and update
Optical device PLC coupling system
Product technical parameters:
|
serial number |
Product name, specifications, model and other descriptions |
quantity |
unit |
Remark |
|
1 |
XYZ three-axis high-precision electric axis Model: GT3201-L/R |
1 |
set |
6 automatic axes (3 electric axes on the left and right) |
|
2 |
Θxθyθz three-axis tilt table |
2 |
set |
|
|
3 |
7-axis motion control unit + industrial computer Model: GT-S600-7 |
1 |
set |
Contains various motion control/drive parts (data acquisition card, Motion control card, connecting cable), industrial computer, etc. |
|
4 |
Pressure sensor model: GT-S02 |
2 |
pcs |
1pcs on both sides, including supporting capture card, connecting cable, etc. |
|
5 |
Equipped with FA, chip clamping and other fixtures |
1 |
set |
Includes sensor fixture |
|
6 |
Gantry CCD + observation lens |
1 |
set |
Automatic CCD axis |
|
7 |
Seismic isolation table and tooling structure cabinet |
1 |
tower |
Seismic isolation table size: 700*800*800mm |
|
8 |
Optical device automated coupling system software |
1 |
set |
|
|
9 |
Automated coupling light source model: FT-C- |
1 |
tower |
Company-made research and development |
|
10 |
Dual-channel high-speed acquisition power meter model: GT8046 |
1 |
tower |
Company-made research and development |
Optical device PLC optical splitter automatic coupling system For passive devices, another important part of the alignment system is the optical device fixture. There are many types of devices, and the fixtures are also diverse, and some need to be specially processed according to the actual situation of the customer.
<!–
