Vertical Heavy-Duty Motorized Lift Stage OMDSZ Series
Material: 6061-T4 aluminum alloy.; Strong load capacity and high sensitivity; main body of high-quality aluminum alloy with an anodized, wear-resistant and fine-appearance surface.; Fitted with a standard dual-shaft two-phase stepper motor and DB9 interface.; Can be used with the company’s standard two-phase stepper motor controllers.; Can also be adjusted directly using the handwheel at the motor end.
Product Introduction
The OMDSZ vertical heavy-duty motorized lift stage is driven by a low-vibration, low-noise two-phase stepper motor. The main body is high-quality aluminum alloy with an anodized surface for good wear resistance and a fine appearance, and stainless-steel guide posts with linear bearings provide strong load capacity and smooth motion even under heavy loads. The OMDSZ series offers a large travel range, meeting most travel requirements.
Product Features
Material: 6061-T4 aluminum alloy.; Strong load capacity and high sensitivity; main body of high-quality aluminum alloy with an anodized, wear-resistant and fine-appearance surface.; Fitted with a standard dual-shaft two-phase stepper motor and DB9 interface.; Can be used with the company’s standard two-phase stepper motor controllers.; Can also be adjusted directly using the handwheel at the motor end.
Technical Specifications
| Model | OMDSZ200A | |
| Mechanical Specifications | Tabletop Size (mm) | 200X100 |
| Travel (mm) | 200 | |
| Transmission Mechanism | Precision T-Screw Tr16×4.0 | |
| Body Material & Surface Finish | Aluminum alloy, black anodized | |
| Overall Height (mm) | 500 | |
| Weight | 8.1kg | |
| Vertical Load | 20kg | |
| Max Speed (mm/s) | 10 | |
| Sensor Supply Voltage (V) | DC24V ±10% | |
| Repeat Positioning Accuracy (μm) | ≤±50 | |
| Electrical Specifications | Motor & Step Angle (°) | 2-phase 57 stepper motor, step angle 1.8° |
| Motor Brand & Model | Leadshine | |
| Operating Current (A) | 5.0 | |
| Motor Torque (N·m) | 2.3 | |
| Driver Brand & Model | Leadshine | |
| Slide Connector | DB9 (pin) | |
| Limit Sensor | OMRON | |
| Max speed at no load, calculated theoretically and measured at 150 rpm stepper speed. | ||
