Precision Compact Ultra-Thin Motorized Translation Stage OMSC-B Series
Small-lead ball screw with a standard two-phase stepper motor for strong micro-stepping capability and good durability.; Cross-roller guides with high strength and load capacity.; Guide mounting surfaces precision-ground for high motion accuracy.; Three built-in sensors (positive/negative limit and zero) with a high-flexible modular cable for easier maintenance.
Product Introduction
The OMSC-B series precision compact ultra-thin motorized translation stage is a high-precision motorized linear slide specially designed for small sizes and high use frequency. The main body uses hard aluminum alloy with a black anodized finish for good wear resistance and a fine appearance. It uses cross-roller or linear guides with high strength, strong load capacity and good durability; combined with precision grinding of the guide surfaces and precision assembly, it achieves high motion accuracy. The drive uses a precision ball screw (1 mm lead) with a standard two-phase stepper motor for high micro-stepping capability and positioning accuracy.
Product Features
Small-lead ball screw with a standard two-phase stepper motor for strong micro-stepping capability and good durability.; Cross-roller guides with high strength and load capacity.; Guide mounting surfaces precision-ground for high motion accuracy.; Three built-in sensors (positive/negative limit and zero) with a high-flexible modular cable for easier maintenance.
Technical Specifications
| Model | OMSC4020B | OMSC4050B | OMSC40100B | OMSC6020B | OMSC6050B | OMSC60100B | OMSC8050B | OMSC10050B | OMSC12580B | ||||
| Mechanical Specifications | Tabletop Size (mm) | 40×40 | 60×60 | 80×80 | 100×100 | 125×125 | |||||||
| Travel (mm) | 20 | 50 | 100 | 20 | 50 | 100 | 50 | 50 | 80 | ||||
| Transmission Mechanism | Precision Ball Screw Ø6×1 | Precision Ball Screw Ø8×1 | |||||||||||
| Guide | Precision Guide | Precision Guide | Precision Guide | Precision Guide | Precision Guide | Precision Guide | Precision Guide | ||||||
| Body Material & Surface Finish | Aluminum alloy, black anodized | ||||||||||||
| Overall Height (mm) | 40 | 33 | 38 | ||||||||||
| Weight (kg) | 0.4 | 0.5 | 0.6 | 0.45 | 0.55 | 0.7 | 0.9 | 1.2 | 1.5 | ||||
| Coupling (OD-Bore1-Bore2) (mm) | 22-5-3 | 22-5-5 | 22-5-4 | ||||||||||
| Accuracy Specifications | Full-Step Resolution (μm) | 5 | |||||||||||
| Max Speed (mm/s) | 5 | ||||||||||||
| Repeat Positioning Accuracy (μm) | ≤±10 | ||||||||||||
| Backlash (μm) | ≤5 | ||||||||||||
| Static Parallelism (μm) | ≤50 | ||||||||||||
| Straightness (μm) | ≤20 | ||||||||||||
| Motion Parallelism (μm) | ≤20 | ||||||||||||
| Yaw (“) | ≤50 | ||||||||||||
| Pitch (“) | ≤50 | ||||||||||||
| Electrical Specifications | Motor & Step Angle (°) | 2-phase 28 stepper motor, step angle 1.8° | 2-phase 35 stepper motor, step angle 1.8° | ||||||||||
| Motor Brand & Model | Shinano | ||||||||||||
| Operating Current (A) | 1.3 | 1.2 | |||||||||||
| Motor Torque (N·m) | 0.0785 | 0.18 | |||||||||||
| Slide Connector | Connector Port | ||||||||||||
| Slide Connector Cable Type | High-Flex Cable | ||||||||||||
| Slide Connector Cable Length (m) | 0.2 | ||||||||||||
| Sensor Supply Voltage | DC5-24V ±10% | ||||||||||||
| Current Consumption (mA) | Total below 30 mA | ||||||||||||
| Control Output | NPN Open Collector Output | ||||||||||||
| Output Logic | Output transistor ON (conducting) when detected (blocked) | ||||||||||||
| Load | Horizontal Load (kg) | 5 | 8 | 16 | 20 | 25 | |||||||
| Inverted Load (kg) | 2 | 3 | 5 | 6 | 7 | ||||||||
| Vertical Load (kg) | 3 | 4 | 5 | 5 | 5 | ||||||||
| Matching Breadboard Adapter Plate Model | — | — | — | — | — | — | — | — | — | ||||
| Matching Z-Axis Adapter Plate Model | — | — | — | — | — | — | — | — | — | ||||
| Max speed at no load, calculated theoretically and measured at 300 rpm stepper speed. | |||||||||||||
