Open-Loop Controller
Highly integrated package that turns complex low-level development into a high-level language.; Complete development libraries and open APIs for flexible, convenient secondary development.; High-performance hardware/software architecture: stable, reliable and fast response.; Ethernet interface for remote control and distributed control of production lines or systems.; Supports positive/negative/zero hardware limit settings and positive/negative software limit settings.; Supports limit-error correction (with photoelectric limit switches).; Supports relative motion, absolute motion, jogging, user-coordinate motion and multi-axis coordinated motion.
Product Introduction
The OLCU precision open-loop motion controller is an economical multi-axis network motion controller developed by OMTOOLS. The system uses a PC + ARM + FPGA architecture; the embedded operating system on the ARM chip manages the controller’s communication and motion and provides a general development interface for flexible system development. Standard products support 2-axis, 4-axis and 6-axis motion control and are compatible with common motors such as two-phase steppers, Oriental Motors and Panasonic servos, supporting linear, circular and helical interpolation for planar and spatial trajectory control.
Product Features
Highly integrated package that turns complex low-level development into a high-level language.; Complete development libraries and open APIs for flexible, convenient secondary development.; High-performance hardware/software architecture: stable, reliable and fast response.; Ethernet interface for remote control and distributed control of production lines or systems.; Supports positive/negative/zero hardware limit settings and positive/negative software limit settings.; Supports limit-error correction (with photoelectric limit switches).; Supports relative motion, absolute motion, jogging, user-coordinate motion and multi-axis coordinated motion.
Technical Specifications
| Model | OLCU-X-SS | OLCU-X-SM | OLCU-X-SL | OLCU-X-A1 | OLCU-X-A2 | OLCU-X-A4 | OLCU-X-FS | OLCU-X-FM | OLCU-X-FL |
|---|---|---|---|---|---|---|---|---|---|
| Pulse Frequency | Auto-calculated from speed and encoder pulses/rev, max 5 MHz | ||||||||
| Communication Interface | Ethernet + RS232 | ||||||||
| Power Supply | DC24V | DC24V | DC48V | AC220V | AC220V | AC220V | DC24V | DC24V | DC24V |
| Limit Interface | Positive limit, zero limit, negative limit | ||||||||
| Limit Signal Voltage | ≤DC24V | ||||||||
| Pulse Resolution | 32 | ||||||||
| Speed/Acceleration Resolution | 32 | ||||||||
| Output Current | ＜2.2A | ＜4.2A | ＜7.0A | – | – | – | < 1.2 A/phase | < 1.4 A/phase | < 1.8 A/phase |
| Drive Power | – | – | – | 100W | 200W | 400W | – | – | – |
| Drive Type | Current chopper drive | IGBT SVPWM | Micro-step drive, bipolar constant current | ||||||
